This is a digital delay and reverb pedal where the original signal path remains completely analog, and only the affected signal is digital.

• The two effects can be used individually or simultaneously.

If you want to play with delay, just turn the reverb control down to minimum. This way, the Repeats and Time controls will be active.

For exclusive use of the reverb, the Time control should be set to minimum. In this case, besides the Reverb and Mix settings, the Repeats control allows you to modify the character of the reverb, affecting its thickness and decay.

With the ‘momentary switch’ feature, you can hold the effect for just one note (or as long as you want) simply by holding down the switch. The effect will turn off when you release it. For standard use, just press the switch once to toggle the effect on.

• Soft-touch relay switch (requires power to operate)
• Operates on 9V
• Consumes 78mA
• Input impedance 1Mega Ohm
• Metal enclosure
• 6.3mm mono Jack input and output
• Dimensions: 121 x 64 x 57mm

About EarthQuaker Devices

EarthQuaker Devices was founded in 2004 by musician Jamie Stillman, who began designing effect pedals after successfully repairing a broken overdrive pedal. Today, it is a company whose team is deeply dedicated to music. They handcraft and test each pedal individually in Ohio, USA.