- EuroRack synthesizer module
- Ambient, spacious, expansive, and magical reverb sounds
- 4 mono CV input jacks of 3.5 mm (Drag, Mode, Diffuse, and Length)
- Mono input and output jacks of 3.5 mm
- 3.5 mm mono jack for Reflect send and return
- Power supply via standard 10-pin EuroRack power connector with a mark to indicate the negative pins
- Current draw of 95 mA from the +12V rail
- 0 mA from the -12V and +5V rails
- Width of 16 HP
- Maximum depth of 31.75 mm (1.25")
Earthquaker Devices Afterneath Eurorack Module
Reference:
EQDAFTEEUROV1DE
Add to compare
(0)
- 9 selectable modes to change how the 'Drag' control functions (Unquantized, Unquantized with 'slew'; Voltage / octave unquantized, Chromatic scale, Minor scale, Major scale (Lydian), Pentatonic scale, Octaves and fifths, octaves)
- Controls for Input, Damping, Reflect, Mix, Drag, Mode, Diffuse, and Length
- 4 CV attenuators (Drag, Mode, Diffuse, and Length)
- Status LED
- Less than 1.25" (31.75 mm) protrusion behind the panel with the power supply installed
- Audio input capable of handling signals from instrument level to modular level
- Depending on the configuration of the input knob
About EarthQuaker Devices
EarthQuaker Devices was founded in 2004 by musician Jamie Stillman, who began designing effects pedals after successfully repairing a broken overdrive pedal. Today, it is a manufacturer with a dedicated team passionate about music. They produce their pedals one by one, handcrafted and tested in Ohio, USA.
EAN13: 0810019911484
English
Español